composite casting
英 [ˈkɒmpəzɪt ˈkɑːstɪŋ]
美 [kəmˈpɑːzət ˈkæstɪŋ]
网络 复合铸造
双语例句
- It has a directive function for optimizing bimetal composite casting process.
为双金属复合铸造工艺的优化起到指导性作用。 - Numerical Simulation on Temperature Field and Experimental Verification of Composite Casting Bearing Roller during Quenching Process
复合铸钢支承辊淬火过程温度场数值模拟与实验验证 - FTIR Research on New Kind of Tapioca Starch/ Bentonite Composite Casting Binder
新型铸造用淀粉/膨润土复合粘结剂的红外研究 - The hard alloy workpiece made from hard alloy-cast steel composite casting technique has high toughness, low production cost and good use effect. This technique is well worth spreading.
应用硬质合金／铸钢复合铸造技术生产的硬质合金工件，韧性高、成本低、使用效果好，值得广泛推广使用。 - For enhancing synthetic function of the materials it is treated by deteriorating and used centrifugal composite casting and improved technology of heat treatment.
通过变质处理和采用离心复合铸造技术，以及热处理工艺的改进，从而提高了材料的综合机械性能； - The Infiltration Process of Metal Matrix Composite by Pressure Casting
压力铸造金属基复合材料的浸渗过程 - Investigation on Microstructures and the Cushioning Properties of the Foamed Composite Material of Casting Magnesium Alloys
铸造镁合金泡沫复合材料的组织及缓冲性能研究 - High temperature deformation behavior of in-situ synthesized ( TiB+ TiC)/ Ti matrix composite by common casting equipments was studied.
研究了利用普通熔铸设备，原位合成法制备的TiB和TiC颗粒增强钛基复合材料的高温变形行为。 - Research on Inlay Composite Casting Technology of Bi-metal Hammer
镶铸双金属复合锤头铸造工艺的研究 - Composite Casting Squeezing Axle of Squeezing Machine
复合铸造榨油机榨轴 - Grinding Tooth of Disintegrator Manufactured by Composite Casting
复合铸造粉碎机碾齿 - A process and device of horizontal continuous composite casting was advanced to produce Al-Pb-steel backing bearing material.
提出了AlPb钢背轴瓦材料的连铸复合方法，设计研制了实现该方法的水平连铸复合装置。 - Application of Infrared Thermometric Techniques in the Production of Centrifugal Composite Casting Rolls
红外测温技术在离心复合铸造轧辊生产上的应用 - Study on Piston of Gradient Aluminum Matrix Composite by Squeeze Casting
梯度复合材料活塞的挤压铸造研究 - The infiltration processes of melt aluminium alloy into SiC whisker preform were analyzed during the fabrication of SiCw/ Al composite by squeeze casting method.
本文深入分析了用压铸法制造SiCw/Al复合材料过程中液态铝渗入SiC晶须预制块中的渗透过程。 - After reviewing the present situation of ferro-base compound material research in China and other countries a new technique to prepare in-situ particle intensified ferro-composite ── reaction casting process was proposed.
在综述了国内外铁基复合材料研究现状的基础上，提出了一种制备原位（Insitu）颗粒增强铁基复合材料的新技术&反应铸造法。 - Microstructure and Interface Phenomenon of SiC/ Al Surface Composite Casting
表面复合铸造SiC／Al显微组织及界面现象初探 - This paper studies the reconditioning technology of brush plating to composite surface of casting iron and chromium coating, compares several technological lines, selects optimum technology among them, and reconditions successfully a large hydraulic system.
本文研究了铸铁及电镀铬层复合表面的电刷镀修复工艺，并比较了几种工艺路线，选择其中最佳工艺，成功地修复了大型进口液压系统。 - Abstract The paper describes the chemical composition design, metallographic structure and mechanical properties of troostite high chromium multi-element alloy cast iron grinding balls of mine use which are produced with the metal-sand composite casting technology.
本文介绍了采用金属&砂复合型铸造的矿山用屈氏体高铭多元合金铸铁磨球的化学成分设计、金相组织及力学性能等特点。 - The fabrication of steel matrix surface-layer composite by sand casting
普通砂型铸造钢基表层复合材料的研制 - Research on Liquid-Solid Composite Casting of White Cast Iron/ Carbon Steel
白口铸铁/碳钢液-固复合铸造研究 - Research for High Chromium Cast Iron Materials Used for Centrifugal Composite Casting Cold Rolls
离心铸造复合冷轧辊用高铬铸铁材料研究 - Utilizing stress calculating formula of thick-wall cylinder to which only inner pressure has been applied, allowable maximum size of metallic prefabricated piece enveloped location in liquid-solid composite casting has been calculated.
利用只受内压的厚壁圆筒应力计算公式，计算出液固复合铸造时金属预制件被包覆部位的最大允许尺寸。 - By experiment on composite casting of white cast iron/ carbon steel and production practice of the bimetal castings, the calculated result has been proved to have certain practical value for controlling the cracking tendency on the inner surface of the enveloping layer.
白口铸铁/碳钢复合铸造试验及生产实践都表明，计算结果对控制包覆层内表面裂纹的产生具有一定的实用价值。 - Composite Metal Casting for the Impact Plate of Fan Mills
风扇式磨煤机冲击板采用双金属复合浇铸的研制情况 - This paper uses numerical simulation technique to simulate unstable temperature field in the process of bimetallic composite casting.
应用数值模拟技术对双金属复合过程中的非稳态温度场进行计算。 - Investigation of High Speed Steel Centrifugal Composite Casting Roll
高速钢离心复合铸造轧辊的研究 - Unstable Temperature Field Simulation of Bimetallic Composite Casting Process
双金属复合过程非稳态温度场的研究 - Factors affecting properties of green body of SiAlON-SiC composite by gel casting
影响凝胶注模成型SiAlON-SiC复相材料坯体性能的因素 - Adopting the method of the solid-liquid composite casting, the new type anti-impact and anti-wear hammer head, in witch the soft material and hard material are alternately arranged, were made.
采用固-液复合铸造的方法，制造出一种软硬材料相间、抗冲击及耐磨性能高的复合锤头。